UK Remortgage Calculator

Last Updated:

Find your new monthly payment, the months until a remortgage pays for itself and the total cost over your deal, against staying put or reverting to your SVR. Add fees, an early repayment charge or extra borrowing.

Quick answer: A remortgage calculator shows whether a new deal saves more than it costs. On £200,000 with 20 years left, moving from 6.00% to 4.50% for 5 years (an illustration) with £1,600 of costs, the payment falls by £161.24, the costs are repaid in month 10, and you pay £12,646.43 less than staying put.

£
Required. What you still owe today.
%
Required. The rate you pay now.
years
Required. Use a decimal for part years, such as 19.5.
%
Optional. Your lender's standard variable rate after the deal ends.
Sets the baseline for the tiles. The table shows both.
%
Required. The rate on the offer you hold.
years
Required. A longer term lowers the payment but not the debt.
How long the new rate lasts. The costs are measured over this period.
years
Optional. Overrides the list when filled.
£
Optional. Use your quote. Leave blank for none.
Adding it keeps your cash but adds interest.
£
Optional. Valuation, legal and any other fees, paid upfront.
%
Optional. A percentage of your balance. It applies only if you leave during your current deal, so leave it at 0 if your deal has ended.
£
Optional. Money you raise on top of your balance, for example for home improvements.

Repayment mortgages only. Interest-only is not modelled.

Break-Even Point

—

Current Payment—
New Payment—
Payment Change—
Costs—
Interest Over the Deal—
Total Cost Against Baseline—

📐 Formula

Monthly payment = Loan × r ÷ (1 − (1 + r)−n), where r is the annual rate ÷ 12 and n is the number of monthly payments. Costs = Arrangement fee + Other costs + Early repayment charge, where the charge is the percentage × your balance. Break-even months = Costs ÷ (Baseline payment − New payment on the same loan without any fee added to it), rounded up. Total cost over the deal = Payments made + Costs paid upfront + Balance still owed at the end of the deal − Amount borrowed at the start. The saving is the baseline's total cost less the remortgage's.

How to Use the UK Remortgage Calculator

1

Enter your current mortgage

Type the balance you owe, your current interest rate and the years left. The calculator works out your current payment, so you do not need to look it up.

2

Add your SVR if you want that comparison

Type the standard variable rate your deal would move to when it ends, then choose which baseline to compare against. Leave it blank to compare only against your current rate.

3

Enter the new deal

Type the new rate and the new mortgage term, then choose how long the new deal lasts. Use the custom box for a deal length not in the list.

4

Add fees, the early repayment charge and any extra borrowing

Enter the arrangement fee and choose to pay it upfront or add it to the loan. Add valuation, legal and other costs, the early repayment charge as a percentage if you are leaving mid-deal, and any extra borrowing.

5

Read the result

The break-even shows the months until the saving repays your costs. The tiles and the table show the payments, interest, balance at the end of the deal and total cost of each route over the deal period.

How This Remortgage Calculator Works

A remortgage replaces your mortgage with a new deal, with your current lender or a new one. This calculator compares the mortgage you have with the one you are offered, using your own figures. It works out your current payment from your balance, rate and years left, so you do not need to look it up, then the new payment from the new loan, rate and term. Both are repayment mortgages: each payment covers the interest and pays some of the balance down.

The result box answers three questions. How much does the payment change? How many months until that saving repays your costs? And over the length of the new deal, which route costs less in total?

Break-Even: Costs Divided by the Monthly Saving

Add up your costs (the arrangement fee, valuation and legal costs, and any early repayment charge), divide by how much the payment falls, and round up to a whole month. The result also shows years and months, so 51 months reads as 4 years 3 months. If break-even lands inside your deal length, the saving has repaid the costs before the new rate ends.

Total Cost Over the Deal Period

A lower payment can hide a bigger debt. The total cost adds the payments you make over the deal, plus the costs you pay, plus the balance you still owe when the deal ends, and takes off the amount you borrowed at the start. For a mortgage with no fees that is simply the interest. Because the balance is in the sum, a deal that leaves you owing more at the end cannot look cheaper than it is.

Two Baselines: Stay on Your Rate or Revert to Your SVR

Choose the baseline that matches your position. If you are mid-deal and would stay on your current rate, compare against that. If your deal is ending, your lender's standard variable rate (SVR) is the rate a fixed or discounted deal usually moves to. Type your SVR from your own paperwork and compare against it. The table always shows both baselines side by side once you have typed an SVR. This page states no SVR, lender rate or Bank of England rate, because those change and your own documents are the record.

Worked Example: Moving From 6.00% to 4.50% on a 5-Year Deal

Take a £200,000 balance at 6.00% with 20 years left. You are offered 4.50% on a new 20-year term, fixed for 5 years. The arrangement fee is £1,000, added to the loan, and valuation and legal costs are £600. The early repayment charge is 0 because your deal has ended. These rates and fees are an illustration, not quoted figures.

Current payment: £1,432.86 a month. New payment: £1,271.63 on a £201,000 loan, so the payment falls by £161.24.

Break-even: without the fee in the loan the new payment would be £1,265.30, a saving of £167.56. Your costs are £1,000 + £600 = £1,600, and £1,600 ÷ £167.56 = 9.55, so the saving repays the costs in month 10, well inside the 5-year deal.

Over the 5 years: staying put costs £55,770.92 in interest. Remortgaging costs £43,124.50 in total, which is £41,524.50 of interest plus the £1,600 of costs. That is £12,646.43 less. The balance when the deal ends is £166,226.98 against £169,799.20 if you had stayed.

Pay the Arrangement Fee Upfront or Add It to the Loan?

Paying upfront keeps the loan smaller. Adding the fee keeps your cash but you pay interest on it for the whole term. Switch the Pay the Fee setting to compare. On the example above, paying the £1,000 upfront gives a payment of £1,265.30 and a saving of £12,853.02 over the 5 years. Adding it to the loan makes the payment £1,271.63 and the saving £12,646.43, so adding it costs £206.59 more over the deal. The break-even figure always counts the saving as if you paid the fee upfront, so the two choices stay comparable.

Early Repayment Charges: When You Leave Mid-Deal

Many lenders charge an early repayment charge (ERC) if you leave a fixed or discounted deal before it ends, and state it as a percentage of the balance. Your lender gives the figure for your deal. Type the percentage in the Early Repayment Charge box and the calculator adds it to your costs. If your deal has ended, leave it at 0.

Here is what it does to the numbers. Take the same £200,000 balance on a 5.50% deal with 20 years left, moving to 4.50% over 20 years on a 5-year deal. The arrangement fee is £999, paid upfront, with £600 of other costs, and the charge is 2% (an illustration). The payment falls from £1,375.77 to £1,265.30, a saving of £110.48. The charge is £4,000, so your costs are £5,599 and break-even is month 51, which is 4 years 3 months. That is still inside a 5-year deal, and you finish £4,005.84 ahead. With no charge the costs are £1,599 and break-even is month 15. Run the calculator once with the charge and once with it at 0 to see what leaving early costs.

When Remortgaging Does Not Pay

The Rate Drop Is Small

On £200,000 with 20 years left, moving from 5.50% to 5.30% with £1,599 in costs lowers the payment by only £22.49. Break-even takes 72 months, which is 6 years. On a 2-year deal you finish £807.91 worse off than if you had stayed. Compare break-even with the length of the deal you are offered.

The Deal Is Short

A saving needs time to repay the costs. The same costs repaid over a 2-year deal need a much bigger monthly saving than over a 5-year deal. Set the deal length to match the offer, and use the custom box if it is not in the list.

A Shorter Term Raises the Payment

Moving to a shorter term can raise the payment, so there is no monthly saving to repay the costs from. The calculator then shows "No payment saving" and still reports the interest and total cost, which is the number to read.

A Longer Term Lowers the Payment, Not the Debt

Keep the example with the fee paid upfront and stretch the new term from 20 to 30 years. The payment drops to £1,013.37, so the saving looks like £419.49 a month and break-even is month 4. Look at the balance at the end of the 5-year deal, though. It is £182,315.83 against £165,399.98 on the 20-year term, which is £16,915.85 more still owed. The lower payment comes from the extra ten years, not from a better rate.

How to Avoid the Term Reset

Pick a new term close to the years you have left. The calculator then compares like with like, and the balance at the end of the deal tells you straight away if the new mortgage leaves you owing more.

Borrowing Extra When You Remortgage

Type an amount in the Extra Borrowing box and the calculator adds it to the new loan. The payment rises, the saving shrinks, and the interest and the balance at the end of the deal rise with it. On the example with the fee paid upfront, borrowing an extra £20,000 makes the loan £220,000 and the payment £1,391.83. That is only £41.03 a month below your current payment, even though the rate fell by 1.50 points. Over the 5 years you pay £4,131.79 more interest than on £200,000 at the same rate, and you owe £16,540.00 more when the deal ends.

Extra borrowing is repaid over your mortgage term, so compare it with what you would use it for. The home equity calculator shows how much equity you hold. For the same sum as a personal loan, use the personal loan calculator.

Remortgage or Product Transfer?

A product transfer is a new deal with your current lender on your existing mortgage. A remortgage usually means moving the mortgage to a new lender, though people use the words loosely (common practice). Your lender or broker will say which route an offer is.

The arithmetic in this calculator is the same for both, so enter the rate and fee of the offer you hold. If you are comparing a product transfer with a remortgage, run the calculator once for each and compare the break-even and the total cost over the deal. The costs differ between the two routes, so enter your own quote for each.

Remortgage Costs: Enter Your Own Quotes

Remortgage costs usually include a product or arrangement fee, a valuation, legal fees and sometimes an early repayment charge. The amounts depend on your lender, your solicitor and the deal, so this page states none and the calculator uses the figures you type. Ask for each cost in writing, then enter the arrangement fee in its own box and the rest in Other Costs.

Costs matter most on a short deal. The same £1,600 is a larger share of the saving over 2 years than over 5. For a fee-by-fee breakdown of what a purchase costs, see the closing costs calculator.

What the Calculator Leaves Out

This calculator models a repayment mortgage with a fixed rate for the deal period. It does not model interest-only mortgages, a rate that changes during the deal, overpayments, or what happens after the deal ends. It compares the numbers you type, not live deals, and it cannot tell you whether a lender will accept you. It does not cover buy-to-let affordability, so for a rental property use the UK buy-to-let mortgage calculator. For a full payment on a new purchase, see the mortgage calculator.

Remortgage in the UK, Refinance in the US

Remortgage is the UK word for refinance, and the arithmetic is the same. This page uses UK terms: the SVR baseline, the arrangement fee and the early repayment charge. If you are in the US, the refinance calculator uses closing costs, points and cash out instead. To see how a schedule changes month by month, use the amortization calculator.

⚠️ Disclaimer These remortgage figures are estimates for planning only and are not mortgage advice. Your lender's written offer of the rate, costs and payment decides what you pay, so compare it with these results before you commit.

Frequently Asked Questions

It compares two mortgages on the same home. You enter your balance, rate and years left, then the new rate, term and deal length. The calculator works out both monthly payments, adds your fees and any early repayment charge, and shows the months until the saving repays your costs and what each route costs over the deal. It models a repayment mortgage only.
Costs usually include a product or arrangement fee, a valuation and legal fees, and sometimes an early repayment charge (common practice). They differ by lender and solicitor, so get each in writing. What moves the answer is how you pay the fee: on the worked example, adding a £1,000 fee to the loan costs £206.59 more over the 5-year deal than paying it upfront.
Many lenders state the charge as a percentage of the balance you repay early (common practice), and your lender gives the exact figure. Type it in the Early Repayment Charge box and the calculator applies it to your balance. It applies only if you leave during the deal, so leave it at 0 if your deal has ended. A worked case: a 2% charge on £200,000 is £4,000, which moves break-even from month 15 to month 51, or 4 years 3 months. If the charge pushes break-even past the end of the new deal, leaving early does not pay on cost alone.
Compare the dates, not only the rates. Before your fixed rate ends: leaving before the end date can trigger an early repayment charge, and waiting can move you onto your lender's standard variable rate (common practice). Run the calculator once with the charge and once with the charge at 0 to compare leaving now with waiting. When it ends: if the new deal costs less than reverting to your SVR over the deal period, and its costs are repaid inside the deal, it looks sensible on cost alone. Now or later: waiting has a price you can measure: the monthly saving multiplied by the months you wait, if the offer stays available. The calculator cannot predict future rates or know whether a lender will accept you, so decide whether the wait is worth that cost. Your lender or a broker can tell you how far ahead you can arrange a new deal.
A product transfer stays with your current lender, and a remortgage usually moves the mortgage. Get each offer's rate and fee in writing and run the calculator once per offer. Judge them on the total cost over the deal, not the payment, because a lower payment can leave a bigger balance at the end. If the two totals are close, choose the offer with the shorter break-even.
Yes, for borrowing extra on a repayment mortgage: type the amount in the Extra Borrowing box. The trade-off shows in one line of the worked example, where an extra £20,000 leaves the payment only £41.03 below today's even though the rate fell 1.50 points. It does not model interest-only borrowing or other equity release products.
Compare the total cost of each, not only the monthly payment. Run this calculator with the extra amount in the Extra Borrowing box, then price the same sum on the personal loan calculator. A mortgage runs for decades, so a small rate difference can still cost more in interest than a short loan.
It fits a buy-to-let mortgage only if yours is a repayment mortgage, because interest-only is not modelled. An interest-only payment is lower than the repayment payment shown here, so do not compare the two. For the payment, the rental stress test and the maximum loan, use the UK buy-to-let mortgage calculator. If you raise money to buy another property, use Extra Borrowing, but the calculator does not model the purchase costs.
Yes. This calculator is free and asks for no name, email address or phone number. The figures you type stay in your browser and nobody contacts you. It compares the numbers you enter, such as your current deal against an offer you hold, and it does not search live deals.
Yes for the arithmetic. The payment maths does not depend on where in the UK the home is. Use your own solicitor's quote for legal costs, and enter it in the Other Costs box.

Sources & Methodology

The payment, break-even and total cost figures are arithmetic from the standard fixed-rate repayment formula shown above. The rates, fees and amounts in the examples are illustrations, not quoted figures. The statements that the SVR is the rate a deal usually moves to, that early repayment charges are usually a percentage of the balance, that remortgage costs can include fees, valuation and legal costs, and that a new deal can be with your current lender are drawn from the MoneyHelper guidance below. The statements still marked common practice are not, so check them against your own lender's offer and paperwork.